McIntosh HT-3 Owner'S Manual Download Page 2

2

IMPORTANT SAFETY

INSTRUCTIONS!

PLEASE READ THEM BEFORE

OPERATING THIS EQUIPMENT.

WARNING - TO REDUCE RISK OF

FIRE OR ELECTRICAL SHOCK, DO

NOT EXPOSE THIS EQUIPMENT TO

RAIN OR MOISTURE.

NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO

QUALIFIED PERSONNEL.

To prevent the risk of electric shock, do not remove cover or

back. No user serviceable parts inside.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Install in accordance with the manufacturer’s

instructions.

8. This apparatus is capable of producing high

sound pressure levels. Continued exposure to
high sound pressure levels can cause permanent
hearing impairment or loss. User caution is
advised and ear protection is recommended when
playing at high volumes.

9. Do not install near any heat sources such as

radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.

10. Only use attachments/accessories specified by the

manufacturer.

11. Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer,
or sold with the apparatus. When a
cart is used, use caution when
moving the cart/apparatus
combination to avoid injury from
tip-over.

12. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has
been damaged in any way, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.

13. Do not expose this equipment to dripping or

splashing and ensure that no objects filled with
liquids, such as vases, are placed on the
equipment.

Summary of Contents for HT-3













Reviews: