10
Connecting to an Analog Preamplifier or A/V Control Center
Connecting to an Analog Preamplifier or
A/V Control Center
The D150 has the ability to automatically switch
Power On/Off with the Analog Preamplifier or A/V
Control Center via the Power Control connection. The
Data Port Connections allow for the remote operation
of basic D150 functions using the Analog Preamplifier
Remote Control.
The connection instructions below, together with
the D150 Connection Diagram located on the separate
folded sheet “
Mc1B
”, is an example of a typical audio
system. Your system may vary from this, however the
actual components would be connected in a similar
manner. For additional information refer to “Connec-
tor and Cable Information” on page 4.
Note: The Analog Preamplifier or A/V Control Center
Power may be connected to the D150 Balanced
or Unbalanced Outputs.
Power Control Connections:
1. Connect a Control Cable from the Analog Pream-
plifier or A/V Control Center to the D150 POWER
CONTROL IN Jack.
2. Connect a Control Cable from the D150 POWER
CONTROL OUT Jack to the SACD/CD Transport
Power Control In Jack.
3. Connect a Control Cable from the SACD/CD
Transport Power Control Out Jack to the Tuner
Power Control In Jack.
4. Connect a Control Cable from the Tuner Power
Control Out Jack to the SACD/CD Player Power
Control In Jack.
5. Connect any additional Components in a similar
manner, as outlined in steps 2 and 3.
Data Connection:
6. Connect a Control Cable from the D150 DATA IN
Jack to the Analog Preamplifier or A/V Control
Center DVD or VIDEO Data Port Input.
Sensor Connection:
7. Optionally, connect the external Sensor to the Ana-
log Preamplifier or A/V Control Center IR Input
Connector to the external Sensor.
Audio Connections:
8. Connect balanced audio cables from the D150
FIXED AUDIO OUTPUT (R&L) connectors to
the balanced Input connectors on the Analog Pre-
amplifier or A/V Control Center DVD or VIDEO
Input.
Digital Audio Connections:
9. Connect a Digital DIN Cable from the D150 DIGI-
TAL DIN INPUT Jack to the SACD/CD Transport
Digital Audio DIN Output Jack.
10. Connect a Digital Coaxial Cable from the D150
DIGITAL AUDIO COAXIAL IN 1 Jack to the
Tuner Digital Coaxial Output Jack.
11. Connect a Digital Optical Cable from the D150
DIGITAL AUDIO OPTICAL IN 1 Jack to the
SACD/CD Player Digital Optical Output Jack.
12. Connect a USB cable with (type A to type B) con
-
nectors from the D150 DIGITAL AUDIO INPUT
USB to the Computer USB connector.
13. Connect any additional Components in a similar
manner, as outlined in steps 8 thru 11.
AC Power Cords Connections:
14. Connect the D150, Analog Preamplifier or A/V
Control Center and any remaining components’
AC Power Cords to a live AC outlet as illustrated.
