background image

7

Installation

Installation

The C2300 can be placed upright on a table or shelf, 

standing on its four feet. It also can be custom in-

stalled in a piece of furniture or cabinet of your 

choice. The four feet may be removed from the bottom 

of the C2300 when it is custom installed as outlined 

below. The four feet together with the mounting 

screws should be retained for possible future use if the 

C2300 is removed from the custom installation and 

used free standing. The required panel cutout, ventila-

tion cutout and unit dimensions are shown.

Always provide adequate ventilation for your 

C2300. Cool operation ensures the longest possible 

operating life for any electronic instrument. Do not 

install the C2300 directly above a heat generating 

component such as a high powered amplifier. If all 

the components are installed in a single cabinet, a 

quiet running ventilation fan can be a definite asset in 

maintaining all the system components at the coolest 

possible operating temperature.

A custom cabinet installation should provide the 

following minimum spacing dimensions for cool 

operation.

Allow at least 6 inches (15.24cm) above the top, 2 

inches (5.08cm) below the bottom and 1 inch (2.54cm) 

on each side of the Tube Preamplifier, so that airflow 

is not obstructed. Allow 19-1/2 inches (49.53cm) depth 

behind the front panel. Allow 1-1/8 inch (2.9cm) in 

front of the mounting panel for knob clearance. Be 

sure to cut out a ventilation hole in the mounting shelf 

according to the dimensions in the drawing.

  6-

9/16

"

 16.67cm

17-

3/16

"

43.66cm

Cutout Opening for Custom Mounting

C2300 Front Panel 

Custom Cabinet Cutout

   15"

 38.1cm

 7

-1/2

"

19.05cm

    15"

 38.10cm

Cutout

Opening

for

Ventilation

Cutout Opening for Ventilation

Support

Shelf

Chassis

Spacers

C2300 Side View

in Custom Cabinet

C2300  Bottom View

in Custom Cabinet

  4"

10.16cm

12

-5/16

"

31.27cm

Cabinet

Front

Panel

    6"

15.24cm

Opening

for Ventilation

Note: Center the cutout Horizontally

          on the unit. For purposes of 

          clarity, the above illustration

          is not drawn to scale.

1

-1/16

"

2.70cm

Summary of Contents for C2300

























Reviews: