McIntosh C2300, Service Manual

Page: 39 / 40

C2300
63
REPACKING INSTRUCTION
Packing Instructions
In the event it is necessary to repack the equipment for shipment,
the equipment must be packed exactly as shown below. It is very
important that the four plastic feet are attached to the bottom of
the equipment. This will ensure the proper equipment location on
the bottom pad. Failure to do this will result in shipping damage.
Use the original shipping carton and interior parts only if they are
all in good serviceable condition. If a shipping carton or any of
the interior part(s) are needed, please call or write Customer Ser-
vice Department of McIntosh Laboratory. Refer to page 4. Please
see the Part List for the correct part numbers.
Quantity Part Number Description
1 033888 Shipping carton only
4 033887 End cap
1 033697 Inside carton only
1 034414 Top pad (foam)
1 034301 Bottom pad
4 017937 Plastic foot
4 400159 #10-32 x 3/4” screw
4 404080 #10-7/16” Flat washer
( )