9
Left Side Connections, Right Side Connections and Fuse Holder
Connect the MC75
power cord to a live AC
outlet. Refer to the rear
panel to determine the
correct voltage
POWER CONTROL IN receives a turn
On/Off signal from a McIntosh compo-
nent
POWER CONTROL OUT sends a turn
On/Off signal to the next McIntosh
Component
BALANCED INPUT
for an audio cable
from a Preamplifier
or A/V Control Cen-
ter audio output
BALANCED INput
1
/ OUTput
for an audio cable from a Pre-
amplifier
output or to connect an
audio cable on to the next Power
Amplifier input
OUTPUT Connections
for a 2, 4 or 8 ohm
Loudspeaker
Fuse holder, refer to information
on the side panel of your MC75
to determine the correct fuse
size and rating
1
This Balanced connector may be used as an Input ONLY when connected to a
McIntosh C1000 Preamplifier. For all other connections use only as an Output.
UNBALANCED INPUT
for an audio cable from a
Preamplifier or A/V Con-
trol Center audio output
UNBALANCED INput
2
/ OUT-
put for an audio cable from a
Preamplifier
output or to connect
an audio cable on to the next
Power Amplifier input
2
This Unbalanced connector may be used as an Input ONLY when connected to a
McIntosh C1000 Preamplifier. For all other connections use only as an Output.
