MCi Wind Top AP1920, User Manual, Page: 32 / 61

2-6
Getting Started
▍
c
Onnecting
P
eriPHeral
d
eviceS
the I/o (input/output) ports on the rear panel allow you to connect peripheral
devices. All devices listed here are for reference only.
connecting the USb Devices
this AIo Pc provides USb ports for connecting various USb devices, such as
mouse, keyboard, digital camera, webcam, printer, external optical storage de-
vice,.. and etc. to connect these devices, install the drivers for each device first
if necessary, and then connect the device to the AIo Pc. this AIo Pc is capable
of auto detecting the USb devices installed, and if there is no detection of the de-
vices, please manually enable the USb devices by going to Start Menu / control
Panel / Add Hardware to add the new device.
connecting the communication Device
Wired lAn
the RJ-45 connector of the AIo Pc allows you to connect the lAn (local area
network) devices, such as a hub, switch and gateway, to build a network con-
nection.
for more instructions or detailed steps on connecting to the lAn, please ask your
MIS staff or network manager for help.
