SLF.IMT-120.v8
Sm
ar
tle
dfl
ex
®
TE
C
HNI
C
A
L G
UI
D
E
14
SMARTLEDFLEX®
SAFETY PRECAUTIONS /
PRECAUCIONES
Use as directed
This product serves exclusively lighting purposes and may:
• Expose to strong mechanical loads or strong contamination.
• Only be installed and operated after a condition inspection if the product is dirty or has been moistened through storage.
• Not be modified or converted.
• Do not hang or fasten anything on the product, especially no decoration.
• Never let children play unsupervised with electric products!
The light source of this luminaire is non-replaceable; When the light source reaches the end of its life, the entire luminaire must be replaced.
If these points named above are not adhered to, a short circuit or electrical shock may occur!
Installation
The complete installation must be done by an electrical expert or a specialized maintenance team, who is familiar with valid directives.
Attention:
Switch off power of the mains supply or respectively of the connection lead before doing any works.
Use only parts, which are supplied with the product or are described as accessories! Otherwise the product or the installation might not be sufficiently safe!
Indication for the installer:
In case you do not install a completely supplied system (with transformer), you are considered a “manufacturer” by the low-voltage directive.
In this case you are required to ensure the conformity of the whole system and declare it by attaching the CE-sign.
Installation place
Make sure that the product is mounted on a stable, even and tilt-fixed background. Note the minimum distances in the ceiling.
Attention:
Do not cover the product, especially not with insulating materials.
Operation - Information for the user
Operate the product only if it is working correctly. Switch off the product with a malfunction immediately and operate it again only after examination by an electrical
specialist. This is the case, when:
• Visible damages appear.
• The product does not work.
• Smoke, steam or crackling sounds appear.
• An overheating is recognisable.
Repairs of the product or work on mains voltage-prominent sections may only be carried out by qualified electricians.
Attention:
Exists mortal danger from an electric shock!
