751-232
P2007 Jens Broecking © Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
Actuators and Connectors:
1. POWER INPUT: GND: Grounding. The cable must be connected to the negative pole of the car battery. REM:
Connector for the cable to the radio (On-/Off-Switch). +12 A: Connector for the live wire to the car battery.
2. FUSE: Fuse.
3. SPEAKER OUTPUT: Terminal for the speakers.
4. LOW PASS: Frequency adjustment low pass filter (40 Hz – 300 Hz).
5. HIGH PASS: Frequency adjustment high pass filter (80 Hz – 1.2 kHz).
6. 1 – 4 CH INPUT (L+R): Audio input from the radio.
7. LEDs: POWER: Shows that the device is operating. PROTECT: Shows that the electronic protection switched
the device off.
8. X-OVER: Frequency-separating filter (FLAT/HIGH PASS)
9. BASS BOOST: bass booster (0 dB – 15 dB) to minimize the harmonic distortion of low bass frequencies.
10. LEVEL: Adjuster input sensitivity (5 V – 0.2 V).
11. SPEAKER OUTPUT: Terminal for a subwoofer.
12. 5 CH INPUT (L+R): Audio input of bass signal from the radio.
Installation:
