MCH M3000i Manual Download Page 1

  generator  is  designed  to  give  safe  and  dependable  service  if 

operated  according  to  instructions.  Read  and  understand  the  Owner’s 
Manual  before  operating  the  generator.  Failure  to  do  so  could  result  in 
personal injury or equipment damage.

• The illustration may vary according to the type. 

-1-

PREFACE

Thank you for purchasing 

 generator.

This manual covers operation and maintenance of the 

3000i

 generator.

All information in this publication is based on the  latest product information 
available at the time of approval for printing.

reserves the  right to make  changes at  any time without notice 

and without incurring any obligation.
No  part  of  this  publication  may  be  reproduced  without  written permission.
This manual should be considered a permanent part of the generator and 
should remain with it if it is resold.
Pay special attention to statements preceded by the following words:

 

        

Indicates a strong possibility of severe personal injury or death if 

instructions are not followed.
CAUTION: Indicates a possibility of personal injury or equipment damage 
if instructions are not followed.
NOTE: Gives helpful information.
If a problem should arise, or if you have any questions about the 
generator, consult an authorized 

 dealer.

WARNING

MCH

M

MCH

MCH

MCH

Summary of Contents for M3000i








































Reviews: