ENGLISH
Thank you for purchasing the
AT-150 Breathalyser (Alkoholtester)
. Read these instructions carefully before operating the
unit. Please heed all safety warnings and keep these instructions for future reference. Follow all instructions.
Precautions:
Do not use this device near water, moisture or heat. Only use attachments/accessories specified by the manufacturer. Do not use the machine near flammable materials. Exposure to intense or
prolonged vibration can damage the unit.
If you do not use it for a long time, turn it off and take out the batteries. Refer all servicing to qualified service personnel. Servicing is required when the device has
been damaged in any way, such as liquid has been spilled. Do not open the device.
Legal notice: The McGrey Breathalyser AT-150
breath alcohol tester should be only used to give an indication of the possible presence of alcohol in the breath/blood. This is not a calibrated device which
can be used to determine intoxication or whether it is safe to drive a vehicle, operate equipment, or engage in dangerous activities. Musikhaus Kirstein GmbH takes no responsibility whatsoever for the use of
this product for any reason. This product must not be used as a tool for determining whether a person is able to operate a motor vehicle or device legally or safely. The intake of any alcohol will impair
reflexes and judgment to operate motor vehicle.
Power On / Charging:
Open the battery compartment on backside of device. Insert 2pcs AA batteries or rechargeable batteries according to polarity. Press On/Off button on front side for approx.. 1sec. The LCD
display will turn on. The device is warming up for 18sec (see countdown) and the LCD shows “WAIT”. When the device is ready for use the display will show “BLOW”.
Operation:
Take a deep breath and and blow 3-4 times to the gas entry. The testing result will be shown as symbol (see below) and numeric value. 8sec after testing the device will power off. If a new testing is needed
press the “ON” button again.
Technical Data:
Power supply 3V/DC (2xAAA batteries), warm up time:18sec, weight ca. 45gr,
dimensions: 103mm x 37mm x 19mm, working environment: 10° .. 50°,
detection range: 0,00...2,0‰ (0,0...2,00mg/L), Ac/- 0,2‰
Musikhaus Kirstein GmbH
– Bernbeurener Str. 11 – 86956 Schongau - Germany - T49-8861-909494-0
McGrey AT-150
ArtNr.: 00038747
Version 03/2015
