manualshive.com logo in svg

McGREGOR MCT1825, Original Instruction Manual

Share
Download
McGREGOR MCT1825 Original Instruction Manual Download Page 20

Customer helpline

  0345 605 2065

20

Maintenance and storage

Maintenance

Important note:
Always remove battery before cleaning, repair and storage.

1. Always remove the battery pack whenever you carrying out any cleaning or repair.

2. Keep the motor ventilation slots clean.

3. Your tool requires no additional lubrication or maintenance. There are no user serviceable parts in 
your tool.
4. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth.
5. Always check the cutting head and guard before each use. 
6. Always store your power tool in a dry place.
7. Have the unit professionally repaired should any damage occurs.

1. Disconnect the battery from the grass trimmer before carrying out maintenance or cleaning work.
2. Use only the manufacturer’s recommended replacement parts and accessories.
3. Inspect and maintain the machine regularly. Have the machine repaired only by an authorized repairer.
4. When not in use, store the machine out of the reach of children.

Storage

Grass trimmer

MCT1825 MCT2X1825

Rated voltage

18V   Max.

No load speed

8500/min

Cutting width

250mm

Diameter of line

1.65mm

Line length

1*3m

Machine weight

2.0kg

Charger

ACG318G2

Charger input

100-240V ~ 50/60Hz

Charger output

20V  0.5A

Charging time

3-5 hrs

Battery pack

ABP118W2

Battery type

Lithium-Ion

Battery capacity

18V  2.0Ah, 36Wh

Technical data

Technical data table

Summary of Contents for MCT1825

























Reviews:

No comments

Brands by name

Popular brands

Load more brands