Customer helpline
0345 605 2065
18
1. TOP EDGING (See Fig E)
Use a wide sweeping motion. A slight downward slant of the cutting blades in the direction of motion
gives the best cutting results.
2. SIDE EDGING(See Fig F)
When trimming the sides of the hedge, begin at the bottom and cut upwards, You should taper the
hedge inward at the top. This shape will expose more of the hedge, resulting in a more uniformed
growth.
WARNING:
Check extension cords before each use. If damaged replace immediately.
Never use your tool with a damaged cord since touching the damaged area could cause electrical
shock resulting in serious injury.
If the supply cord is damaged, it should be replaced by a local approved service centre.
Operate
E
F
Operating instructions
