McGREGOR 377695, Instruction Manual

Page: 4 / 12

4
GENERAL FEATURES
Please read these instructions carefully before using this product and keep
them in a safe place for future reference
1. Shaving head
2. Shaving head release buttons
3. On/off switch
4. Pop up trimmer
5. Indication lamp
6. Shaver power socket
ACCESSORIES
USB charging cable / Cleaning brush / Travel pouch.
IN THE BOX
• Rechargeable shaver
• User manual. Read these instructions before use.
USE
What to do before fi rst use:
• Remove the packaging material and inspect the device for damages.
• Do not operate the device if it is damaged in any way. Return it to your seller immediately.
• Never expose the shaver to temperatures below -10°C or higher than +40°C for long periods of time.
• In order to get an ideal cutting effect, check all accessories of product, as well as clean and maintain the product.
INTENDED USE
• Warning! Only use the device externally.
• The appliance is only intended for human hair.
• Any incorrect use can be dangerous!
• To remove an attachment, hold the shaver with one hand and gently pull off the attachment with your other hand.
You can easily click on another attachment.
• The hair must be clean and dry when being cut.
• Only cut small amounts at one time.
• Cut the hair with progressively closer settings until you reach the desired length.
• The cutting head will jam if you try to work too quickly or try to cut too much hair at once.
• Let the appliance run for a short time before starting to cut.
USING THE APPLIANCE
• Attach the accessory which is to be used in the appliance.
• To withdraw hold the hair shaver with both hands and press the blades out with your thumb and support the
blades to avoid falling.
• Select the accessory depending on your needs.
• Attach the accessory to your hair shaver.
• Turn on the appliance. To turn on the appliance, press the switch On / Off upwards. Hold the appliance in your
palm with an angle perpendicular to the plane of the skin (90°). There is no need to apply much pressure on the
appliance.
• Just let the appliance touch the surface of your skin gently.
• Move the appliance closer to the area to be trimmed and move the appliance up and down gently to trim the hairs.