Mcfk | Föpplstr. 14 | D-04347 Leipzig. Tel.: +49 341 / 910 75 816. [email protected]. www.mcfk.de
Installation of the handlebar (only for specialized dealers)
Before starting work, make sure that the handlebar is compatible our handlebar stem. Also check back
with the use instructions of the handlebar maker. If necessary, at first remove the handles, brake and
gearshift levers from the handlebar. Slacken the clamping screws which fix the handlebar to the stem
and push the handlebar in the stem from the side. Align the handlebar centrally. Next, tighten the
screws of the handlebar clamp alternately crosswise. Do not exceed the maximum permitted tigh-
tening torque. Observe the handlebar maker’s maximum permitted tightening torque.
Tighten the handlebar clamping screws to maximum 3 Nm. Otherwise damage may be caused to the
handlebar stem that would be an enormous safety risk for the rider and for others.
In use
Check all screws for proper torque regularly. If necessary, have the tightening torque adjusted to the
maximum permitted torque by a specialized dealer. Make regular checks of the handlebar ato be sure
that this do not turn easily.
Warranty
We grant a warranty of two years from the purchase date of our products. We are sure you appreci-
ate that warranty can only be claimed if you present the invoice of the purchase of the parts and the
invoice of the specialized dealer who installed them. Please return the defective product, together with
a description of the defect, your contact data and the above documents to the seller.
The warranty covers defects of material and manufacture; it does not include damage due to normal
wear and tear, improper use of non-compliance with the instructions of use. Warranty claims can only
be raised against Mcfk. This warranty does not include Mcfk’s liability for damages, in particular, for
indirect damage as a consequence of accident, other indirect damage or consequential damage.
Mount the screw
head in driving
direction right!
max. 5 Nm
clamping steering
tube
handlebar clamping
max. 3 Nm
minimum clamping
area steering tube,
length min. 42mm