Fusion Equipment Safety
1 - 3
Facer Blades Are Sharp
Facer blades are sharp and can cut. Never
attempt to remove shavings while the facer is
running, or is in the facing position between the
jaws. Use care when operating the facer, and when handling the
unit.
NOTICE:
Disconnect power from the facer, and remove the facer
blades before attempting any maintenance or adjustment.
NOTICE:
Never extend the blade beyond the inner or outer
circumference of the facer.
TX02378-1-24-05
WR000
73
-4
-6
-9
3
Electric Motors are Not Explosion Proof
Electric motors are not explosion proof. Operation of
these components in an explosive atmosphere without
necessary safety precautions will result in serious
injury or death.
See Section "Facer" in the Overview section for instructions on
removing brushes from facer motor.
TX02979-04-02-14
WR000
80
-4
-15-0
9
¡PELIGRO!
Electrical Safety
Always ensure power cords are properly
grounded. It is important to remember that you
are working in a wet environment with electrical
devices. Proper ground connections help to
minimize the chances of an electric shock.
Frequently inspect electrical cords and unit for damage. Have
damaged components replaced and service performed by a
qualified electrician.
Do not carry electrical devices by the cord.
NOTICE:
Always connect equipment to the proper power source as
listed on the unit, or in the owner's manual.
NOTICE
: Disconnect the equipment from the power source before
attempting any maintenance or adjustment.
TX02947-4-15-09
WR000
55
-4
-7
-9
3
WR000
25-11-
30
-9
2
