2.
PLACE THE ROLL OF TAPE ON THE BOTTOM PLATE IN THE BACK
OF THE MACHINE BETWEEN THE TAPE GUIDES (BAFFLES). PULL
THE LEADING EDGE OF THE TAPE OVER THE BLACK ROLLER
AND OVER THE SILVER ROLLER AND UNDER THE TAPE PLATE
UNTIL THE TAPE IS POSITIONED UNDER THE FEED WHEEL.
USING THE DISPENSER
1.
PULL HANDLE TO DESIRED LENGTH. THERE IS A SCALE AROUND
THE DRUM JUST INSIDE THE HANDLE BACK, IN INCHES.
2.
RELEASE THE HANDLE; THIS WILL CAUSE THE TAPE TO BE CUT.
DO NOT CARRY HANDLE BACK, JUST RELEASE IT.
3.
HANDLE SHOULD BE OVER THE CENTER OF THE MACHINE.
PUTTING THE HANDLE OVER THE OUTSIDE OF THE MACHINE
CAUSES DAMAGE TO YOUR UNIT.
UTILITY TOP
1.
OFTEN USED ITEMS LIKE MARKERS, UTILITY KNIVES, AND
STAMPS ARE EASILY STORED ON THE FRONT COVER. DO NOT
PUT BEVERAGES ON THE MACHINE.
MAINTAINING THE PHOENIX
®
M-1
1.
WASH THE WETTING BRUSHES ONCE A WEEK WITH SOAP AND
WATER. ONCE A MONTH RINSE OUT THE WATER TANK.
2.
CLEN THE SHEARS AND PRESSURE PLATE WHEN NEEDED AS
THEY CAN ACCUMULATE GLUE. DO NOT SCRAPE JUST CLEAN
WITH WARM WATER. GLUE IS WATER SOLUBLE.
THANK YOU FOR BUYING THE BEST TAPE MACHINE
AVAILABLE ON THE MARKET TODAY.
