2
CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL
2-64
SHUIOLQN
6\QWD[
link portNumber
3XUSRVH
This command displays port link counters for a single port.
3DUDPHWHUV
This command has one parameter.
&RPPDQG([DPSOH
Root> perf link 2
2XWSXW
The port link counter data is displayed as a table that includes the
following statistics.
portNumber
Specifies the port number. Valid values are:
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–144 for the Intrepid 6140
Port The
port
number.
OLS In
The number of offline sequences initiated by the
attached N_Port.
OLS Out
The number of offline sequences initiated by
this director or switch port.
Reset In
The number of link resets initiated by the
attached N_Port.
Reset Out
The number of link resets initiated by this
director or switch.
LIPS In
The number of Loop Initialization Primitives
(LIPS) detected on this switch loop port.
LIPS Out
The number of LIPS generated on this switch
loop port.
Link Flrs
The number of times the port has detected a
link error resulting from an invalid link state
transition or timeout.
Summary of Contents for OPENconnectors
Page 8: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Tables viii...
Page 14: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Preface xiv...
Page 164: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Glossary g 14...
