CLI Commands
config
2
2-53
FRQILJ]RQLQJVKRZ3HQGLQJ
6\QWD[
showPending
3XUSRVH
This command shows the zoning configuration in the work area of
the zone set that has not yet been activated.
3DUDPHWHUV
This command has no parameters.
&RPPDQG([DPSOH
Root> config zoning showPending
2XWSXW
The zoning configuration data is displayed as a table that includes
the following properties.
2XWSXW([DPSOH
The output from the config.zoning.showPending command displays
as follows.
Pending Zone Set
Default Zone Enabled: False
ZoneSet: TheNewUltimateZoneSet
Zone: TheNewUltimateZone
ZoneMember: Domain 10, Port 6
ZoneMember: Domain 15, Port 2
Zone: TheNewNotSoUltimateZone
ZoneMember: 10:00:00:00:C9:22:9B:AB
ZoneMember: 10:00:00:00:C9:22:9B:C6
ZoneMember: 10:00:00:00:C9:22:9B:AB
Zone: TheNewNotUltimateAtAllZone
ZoneMember: Domain 2, Port 63
Local ZoneSet
The enabled status, name, and member zones of
the zone set.
Summary of Contents for OPENconnectors
Page 8: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Tables viii...
Page 14: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Preface xiv...
Page 164: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Glossary g 14...