McDATA OPENconnectors, Command Line Interface Manual

Page: 83 / 170

CLI Commands
config
2
2-51
FRQILJ]RQLQJGHOHWH3RUW0HP
6\QWD[
deletePortMem “zoneName” domainId portNumber
3XUSRVH
This command deletes a domain ID and port number for a zone
member in the specified zone in the work area.
3DUDPHWHUV
This command has three parameters.
&RPPDQG([DPSOH
Root> config zoning deletePortMem TheUltimateZone 10 5
zoneName Specifies the name of the zone that contains the
member to be deleted.
domainId Specifies the domain ID of the member that to
be deleted from the zone. Valid domain IDs are
in the range 1–31.
portNumber Specifies the port number of the member to be
deleted from the zone. Valid port numbers
values are:
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–31 for the ED-5000
0–63 for the Intrepid 6064
0–127 and 132–144 for the Intrepid 6140