CLI Commands
config
2
2-13
FRQILJSRUWVKRZ
6\QWD[
show portNumber
3XUSRVH
This command displays the port configuration for a single port.
'HVFULSWLRQ
This show command, on the config.port branch, displays the current
configuration for the specified port.
3DUDPHWHUV
This command has one parameter.
&RPPDQG([DPSOH
Root> config port show 4
2XWSXW
The port configuration is displayed as a table that includes the
following properties.
portNumber
Specifies the port number. Valid values are:
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–144 for the Intrepid 6140
Port Number
The port number.
Name
The port name.
Blocked
The blocked state. Valid values are true and
false.
Extended
Distance
The extended distance configuration state. Valid
values are true and false. (This field is not valid
on the Sphereon 4500.)
FAN
The fabric address notification (FAN) state.
Valid values are true and false. (Sphereon 4500
only.)
Summary of Contents for OPENconnectors
Page 8: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Tables viii...
Page 14: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Preface xiv...
Page 164: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Glossary g 14...
