
ENGLISH | 15
Using Your Canister Steam System
STEAM MOPPING
NOTE: Be sure that Boiler has been filled and that all steam mopping accessories are con-
nected before following these steps.
It is recommended to sweep or vacuum hard floors before mopping.
1.
Follow Steps 1-3 of General Operation section above.
Refer to Page 9 for a listing of hard floor surfaces that are recommended for cleaning
with the Canister Steam System.
2.
For best results, use a continuous back-and-forth motion over floor surface, pushing the Mop
Head away and pulling it back towards you. Work your way backwards over the floor, in order
to avoid walking over freshly mopped areas.
NOTE: To avoid warping or damage caused by heat and moisture, do not use on un-
sealed hardwood or unglazed ceramic surfaces. Steam may remove the sheen from
some floors that have been treated with wax.
3.
The Microfiber Pad will absorb dirt and moisture during mopping. However, when you are
finished you may find some residual moisture has been left behind. In this case, it is recom-
mended to allow floor time to air-dry. A fan may be directed towards mopped area to facilitate
drying.