McCulloch M48A User Manual Download Page 14

AU

11

CAUTION 

Never tip mower sideways. To gain access to blades or cutting disc tilt backwards so spark plug is up.

CAUTION 

Failure to properly service your mower will reduce it’s operating performance and could void 
warranty. Service costs are not covered by warranty.

MAINTENANCE

ENGINE LUBRICATION

Check engine oil before every mowing session or
every 8 hours or daily.

ENGINE MAINTENANCE SCHEDULE

First 5 Hours
Change engine oil - Oil SAE30. 500ml.

Every 25 Hours or Every Season Change engine 
oil if operated under heavy load or in high ambient 
temperature above 35 C. SAE30. 500ml.

Every 50 Hours or Every Season Change engine oil. 
Use 500 ml of SAE30 oil.
Clean mower.
Mower service should be carried out by an 
authorised McCulloch service agent.

STORAGE

If mower is to be stored for over 60 days, you will
need to drain the fuel, if full, to prevent gum from
forming in fuel system or on essential carburettor
parts.
Remove spark plug and pour about 10ml of engine
oil into cylinder, replace spark plug and turn engine
over (pull cord slowly).

SPARK PLUG

Use only genuine replacement spark plug type
5223761-01. For best results, replace the spark
plug every 100 hours of use.
1.   Stop the engine and remove the spark plug wire.
2.   Remove spark plug
3.    Screw the replacement spark plug into the 

engine and tighten to 25-30 N•m torque and 
replace spark plug wire.

4.   Spark plug gap. 0.6 — 0.7mm

DECK CLEANING

Wipe deck with a damp cloth.

CAUTION 

Do not over-tighten the spark plug as engine 
damage may occur

CAUTION 

Do not hose engine. Water can damage 
engine or contaminate the fuel system

Summary of Contents for M48A




















Reviews: