McCrypt S.T.E.V.E. 15

 

4

Safety Warning 

 

Damage caused by not following the manual instructions renders the 
guarantee void. 
We will not be responsible for any damage caused by neglecting these 
operating procedures! 
We cannot be held responsible for damage caused by neglecting these 
safety instructions! The Guarantee, in this case, also becomes void! 
 
Important  instructions are marked by an exclamation mark in a triangle. 
Please read the complete instruction book before you use the equipment, 
it contains all the important instructions necessary for correct operation. 
 
A warning triangle with a lightning symbol denotes danger from electric 
shock due to open or unprotected cables or components. To avoid 
electrical shock, do not touch any exposed cables, wires or electronic 
parts! 

 
Safety Precautions 
 

  For maximum safety, do not alter this equipment in any way! 

  Only use mains power supply 

230V~/50Hz (10/16A).

  

  Ensure the proper use of  the equipment. Pay attention to the manual instructions. 

  Make sure that the power cable is not crushed or damaged by sharp edges when the 

equipment is set up.  

  Please exercise extreme caution in the presence of children! This equipment has 

many possibilities for tiny hands to explore, or to place small objects in openings 
which may come in contact with live components and cause an electrical shock!                                 

  Keep electrical equipment dry at all times! Do not stand potentially dangerous objects 

(water-filled vases etc.) on the top, or cover with a sheet or plastic cloth! 

  Do not subject the equipment to high temperatures, water showers or spray, strong 

vibration or physical stress. 

  Audio and video tapes should not be stored beside the equipment as they can be 

adversely affected by the magnetic field of the loudspeakers. 

  Keep free of all heat sources – burning candles, radiators etc. 

  Do not use in tropical climates. 

  Do not leave the packing material lying around, as polystyrene, plastic bags and foil 

can be dangerous for children to play with.  

  Do no leave unattended when in use. 

  Should an emergency occur, remove the power cable immediately from the power 

supply socket!  

  Use caution when connecting with other equipment! When in doubt seek qualified 

Advice! 

 

If you are not sure about the proper way to connect the equipment , or you have 
questions not clearly answered in these instructions, please call our service 
department or contact a qualified technician. 

 
 
 
 

 
 

 
Operation 

 

 

Summary of Contents for S.T.E.V.E. 15"








Reviews: