SCREEN DISPLAY AND FUNCTIONS
Twist E/stop on armrest controls to power on and the screen will light up. Note: 12Volts at
the battery are required for correct function.
1.
The screen will initially display the McConnel
logo, software version and the PTO maximum
speed.
2.
Pressing scroll forward once will display the
running screen. The
TOT
displays the total time
the rotor has been switched on. The
JOB
also
displays the rotor on time but may be reset to
zero by pressing the
X
button for 3 seconds.
3.
Pressing either of the Rotor ON buttons will
activate the ‘egg timer’ and rotor image.
4.
Pressing the EDS Lift float button will turn on the
EDS (EDS Lift Float machines only). Then
SOFT, MED or HARD will be added to the
running screen.
5. Pressing
9
while the EDS is turned on will scroll
through the SOFT, MED and HARD working
settings.
6. Pressing
scroll
forward displays the actual
Tractor PTO running speed
7.
Scrolling forward again displays the Power
Monitor screen.
Scrolling backwards will display the screens in the opposite order.
