7
Operating the AROLLA 3
The AROLLA 3 requires no special or unusual operating
technique.
However you’ll find hereunder some useful
reminder which might help you to become more familiar
with your new wing.
Preflight check of the paraglider
Contrôle Preflight check of the paraglider
: check the
canopy for wears ; also check that the inner structure (ribs
and diagonals) is not damaged and that the seams are all
right.
Check of the lines
: check that the lines, including the
seams and the end loops are not damaged. Also check that
the lines are not tangled and are perfectly sorted out.
Check of the rapid links
: check that all the rapid links are
screwed tight.
Check of the risers
: Check that the risers are not damaged
and are not twisted or tangled.
Check that the speed system can be operated freely and
that the ropes are long enough as to avoid unintended
operation of the speed system.
Check that the brake handles are in correct position and
that the brake lines run freely through the brake pulleys.
Take-off
Lay out the paraglider with the leading edge in a
horseshoe shape. Holding the A risers close to the quick
links move forward until the lines are tight.
You should now be perfectly centered in your wing. In nil
wind or a light headwind, with lines tight take several
strides. The AROLLA 3 will inflate rapidly and rise over your
head.
Do not pull the risers too hard, either forward or down, as
this could cause a collapse of the leading edge. Simply
follow them with your arms until the glider reaches its
angle of flight above your head.
