background image

u

s

e

m

a

n

u

a

w

e

b

 v

e

rs

io

n

EQ1ch Tube Equalizer

MCAudioLab

8

Limited 1 year Warranty

During the warranty period, MCAudioLab will repair or replace defective parts with new ones, 
at no additional charge.
This warranty does not extend to any equipment that has been damaged or rendered 
defective as a result of accident, misuse, or abuse; by the use of parts not manufactured or 
supplied by MCAudioLab or by unauthorized modification of the equipment. Vacuum tubes 
are excepted from the warranty, but are warranted for 90 days from date of purchase. Except 
as expressly set forth in this Warranty, MCAudioLab makes no other warranties, express or 
implied, including any implied warranty of merchantability and fitness for a particular purpose

Warranty Repair
If the EQ1ch should develop a problem during the warranty period, contact the factory to 
return shipping instructions. We will repair and return your MCAudioLab equipment quickly.

Note that the warranty does not cover vacuum tubes, which must be periodically replaced.

MCAudioLab shall not be liable for technical or editorial errors or omissions in this manual, nor 
for incidental or consequential damages resulting from the use of this material.
Characteristics may change without notice.

How to contact us

MCAudioLab
84/86, Viale della Rinascita
93017 San Cataldo (CL)
ITALY

[email protected]
www.mcaudiolab.com

Summary of Contents for EQ1CH









Reviews: