22
Manually configure LAN properties
1
Click
Start |
(
Settings
|
)
Control Panel
, then double-click
Network Connections
.
2
Right-click
Local Area Connection
(or appropriate network
connection), and select
Properties
.
3
Select
Internet Protocol (TCP/IP)
, and click
Properties
.
Type the following:
•
IP address
– An IP address that is part of the same
subnet range as the UTM Firewall device LAN connection
(for example, if you are using the default settings,
192.168.0.2 - 192.168.0.254).
•
Subnet mask
– Subnet mask of the UTM Firewall device
LAN connection (if using the default settings,
255.255.255.0).
•
Default gateway
– IP address of the UTM Firewall device
LAN connection (if you are using the default settings,
192.168.0.1).
•
Preferred DNS server
– IP address of the UTM Firewall
device LAN connection (if you are using the default
settings, 192.168.0.1).
4
Click
OK
.
5
Repeat steps 1–4 for each computer on your network.
uf_SG720_qig_700-2240A00_en-us.fm Page 22 Monday, October 12, 2009 11:56 AM
