d
Download these documents.
1)
Manager Appliance Installation Guide
2)
Manager Appliance Release Notes
3)
Manager Administration Guide
3
Install the Manager Appliance on a rack
Use the rack mounting kit included with the Manager Appliance to install the unit into a four-post 19-inch rack.
The kit can be used with most industry-standard rack cabinets. Use the tie wraps to secure the cables from the
Manager Appliance to the rack.
Make sure that you follow the safety warnings. For example, when identifying where you want the
Manager Appliance to go in the rack, remember that you should always load the rack from the
bottom upwards. If you are installing multiple Manager Appliances, start first with the lowest
available position.
Install the mounting rails
Position the mounting rails correctly and install them at same levels.
a
At the front of the rack, position one of the mounting rails so that its mounting bracket aligns with the
required rack holes. Clip the rail into the rack.
b
At the back of the rack, pull the back mounting-bracket (extending the mounting rail) so that it aligns with
the required rack holes.
c
Clip the rail to the rack and secure it.
d
Repeat these steps to secure the second mounting rail to the rack.
e
Make sure that the mounting rails are at the same level on each side of the rack.
2