This Quick Start Guide explains how to quickly set up and activate your McAfee
®
Network
Security Platform M-1250/M-1450 Sensor in in-line mode. Cabling the Sensor's Small
Form-factor Pluggable (SFP) Gigabit Ethernet Monitoring ports for in-line mode enables you
to configure the Sensor to drop attacks before they reach their target.
If you are setting up your Sensor in SPAN or Tap mode, see the Sensor's Product
Guide for cabling instructions.
All product documentation referenced in this Quick Start Guide is found on the McAfee
Service Portal.
The Sensor panel
M-1250/M-1450 Sensor is a 1RU (1 rack unit) and is equipped with the following components:
1
RJ-45 10/100/1000 Management port (1)
5
RJ-45 10/100/1000 Ethernet Monitoring ports (8)
2
RJ-45 Response port (1)
6
External Compact Flash port (1)
3
RS-232C Console port (1)
7
Power supply A (1)
4
RS-232C Auxiliary port (1)
Sensor setup overview
This section explains how to position and cable the various ports of your Sensor. This section
also briefly explains how to install the Manager and then add the Sensor to the Manager,
and verify that you have successfully established communication between the Sensor and
the Manager.
M-1250/M-1450 Sensor Quick Start Guide
Revision A
McAfee
®
Network Security Platform
1
Summary of Contents for IIP-M15K-ISAA - Network Security Platform M-1450
Page 11: ...11...
