MC Clean+ C760 Operator'S Manual Download Page 4

 

- 4 - 

Machine Set-Up 

 

 
1.

 

Adjustable handle                 10. Suction hose                       19,Skirt      

2.

 

Control panel                        11. Adjust wheel                      20, Metal belt 

3.

 

Drain out hose                      12,  Butterfly nut                      21,Guide wheel 

4.

 

Supplementary protector      13, Adjust knob,squeegee        22,Cap for solution tank 

5.

 

Power switch                        14, Squeegee body                   23,Recovery tank 

6.   Squeegee release handle       15, Guide wheel                      24,Cap for recovery tank 
7.

 

  Water volume level              16, Hole for tube water             

8.   Brush lift pedal                     17, Solution tank 
9.   Water valve                           18, Big wheel       
                                                                                                                                                 
 
 
 
 
 
 
 
 
 
 
Note: When the red indicator light flash, means you need to recharge the battery ASAP.             

 

 a   forward and reverse knob     
 b   speed adjust knob 
 c   suction motor button   
 d    brush motor button 
 e    water release button       
  f    battery power  indicator 
   

Summary of Contents for Clean+ C760










Reviews: