mc 701
2
A. General
1. Accessories
Your new MC Lines component comes with a multi-usable system remote control for your convenience. It can be used to
control any or all of the MC product range including the preamplifier, CD player, power amplifier and integrated amplifier
The system remote control is not included in the delivery of the MC power amplifier.
2. Placement
Please ensure that there is sufficient ventilation and flow of air on all sides of the unit. There must be a minimum space of
2 cm (approx. 1”) above all MC amplifiers to allow for excessive heat to escape.
In case you wish to operate two or more amps, you can stack them, place them on shelves, or fit them under a cabinet.
Notice
: Never completely cover or operate the amp in a place with insufficient flow of air. If you do, the amp may
overheat.
3. Maintenance
Unplug the unit before cleaning!
To clean the exterior surfaces of your MC unit use a dry, soft cloth. To wipe off finger prints and other grease spots, use a
soft, wet cloth moistened with a mild detergent dissolved in water.
Caution
: The cloth must never be dripping wet! If water or other fluids enter the cabinet, you risk to damage the unit.
Never use scouring pads, steel wool, scouring powders or harsh chemical agents, alcohol, thinners, benzine, insecticide or
other volatile substances, as these will destroy the finish of the cabinet.