MC Technologies MC-LR User Manual Download Page 5

Page: 5 / 48

User Manual/Web Interface MC-LR/MC-LR-4/MC-LRS/MC-LRS-4 – 01/2018 (FW 2.07.3)

Status information on mobile connection and on local Ethernet network.

1.3.1 Network Connections

1.3 Status

Network Connections

Wireless Network

Link

VPN connected

Active VPN connection via the network.

Not connected:

No packet data connection in the network.

IP Address

Allocated IP address from the network.

Netmask

Allocated net mask from the network.

DNS Server

IP address of the DNS server.

Sec. DNS Server

IP address of the alternate DNS server.

RX bytes

Sum of received data since last login.

TX bytes

Sum of sent data since last login.

Local Network

Link

For each LAN-Port Link (1-4 depending of the router type) the connection of the port is shown

Connected:

The local Ethernet is active.

Not connected:

The local Ethernet is not active.

IP Address

Router IP address in the local network.

Netmask

Router net mask in the local network.

Summary of Contents for MC-LR

















































Search results

Summary of Contents for MC-LR

Reviews:

Related manuals for MC-LR

Brands by name

Popular brands

MC Technologies MC-LR, User Manual

Search results

Summary of Contents for MC-LR

Reviews:

Related manuals for MC-LR

Brands by name

Popular brands