Installazione e uso
9
UC 200 IR
4. Changing password
The programming access Password can be changed in the following way : with the
monitor off (disconnected from the power supply) press all three keys simultaneously
and hold them down for about 10 seconds until the display shows “P----“, now release
the keys and input the new password, use the external keys to change the value of the
first digit and with the middle key go to the next digit.
Technical features
Power supply voltage
From 9 to 16 Vdc
Maximum absorption
60 mA @ 16Vcc (sensors excluded)
80 mA @ 16Vcc with pressure transducer (
1
)
Operating temperature
-20°C ÷ +75°C
IP Protection degree
IP65
Mechanical resistance
2 g
Material
ABS
( (1) = sample calculation 12V power battery : setting the hourly consumption at
80mA/h, setting 10 hours of daily work therefore 80*10=800mA daily, setting 30
consecutive working days thus 800*30=24A=24000mA
Therefore, if the sprayer worked consecutively for 1 month, consumption would be
24A. If you cannot connect UC 200 IR to the tractor battery it is advisable to use a
battery with at least twice the calculated value capacity, thus 48A: for example a
battery for small cars.
