MC Crypt DJM-300, Instruction Manual, Page: 32 / 81

32
Connection
Disconnect the mixer and all other devices to be connected to it from the mains supply (pull the
power plugs) before connecting the devices to each other.
For connecting the cinch inputs and outputs, use only shielded cinch cables suitable for this
purpose. For connecting the microphone input, please only use a suitable microphone cable.
Using the wrong cables can cause interferences.
To avoid distortion or mismatching which may damage the mixer, only connect output devices
with a cinch output to the cinch inputs of the mixer. Only devices with cinch inputs may be
connected to the mixer’s cinch outputs.
Also observe the values stated in the “Specifications”.
The following applies to all RCA connections:
• The white RCA socket on the mixer is the connection for the left channel.
• The red RCA socket on the mixer is the connection for the right channel.
a) Connecting the Inputs
INPUT LINE 1 to LINE 3
The mixer is equipped with five stereo cinch connections for connection of your playback devices.
The connections INPUT 2 and INPUT 3 offer separate connection sockets for line and phono devices, the connection
INPUT 1 has only one connection socket pair that can be switched for line and phono devices.
The connections INPUT 2 and INPUT 3 are switched via the input selection switch PHONO/LINE (5). The connection
INPUT 1 is switched with the PHONO/LINE (28) switch.
LINE inputs are only suitable for devices with a LINE level (e.g. CD players, tape decks).
PHONO inputs are only suitable for record players.
MIC INPUT connection (1)
You can connect your DJ microphone to this input. The connection is suitable for dynamic microphones or condenser
microphones with their own power supply. MIC INPUT (1) is used to connect a microphone with an XLR- or 6.3mm
jack plug.
This input is not suitable for line audio devices or record players.