MBW GPR57, Operator'S Safety And Service Manual

Page: 10 / 25

-
5
-
M
AINTENANCE
WARNING
Always exercise the stopping procedure before
servicing or lubricating the unit.
After servicing the unit, replace and fasten all
guards, shields, and covers to their original
positions before resuming operation.
CAUTION
Always verify fluid levels and check for leaks after
changing fluids.
Do not drain oil onto ground, into open streams,
or down sewage drains.
Maintenance Schedule
1. Check all hardware after the first 5 hours of use, then follow the maintenance schedule.
Fluid Levels
1. MBW #01058---- 6-Pack (8 oz. bottles)
MBW #17320---- 1 quart (32 oz.)
Engine Maintenance
Refer to the engine owner’s manual for maintenance
intervals and procedures.
Engine Speed
1. Engine speed is factory
set
.
Do not tamper with the governor setting. The governor
establishes safe operating limits which must not be
exceeded.
2. Refer to the engine Owner’s Manual for procedure on
setting operating and idle speeds.
3. The engine operating speed should be set to 3600
RPM.
4. The engine idle speed must not exceed 1800 RPM. If
the idle speed is greater than 1800 RPM the clutch
may not disengage.
Belt Adjustment
If any belt stretch develops follow these steps:
Refer to MAIN ASSEMBLY, page 22.
SYSTEM MAINTENANCE
EACH
USE
EVERY 50
HOURS
EVERY 100
HOURS
EVERY 250
HOURS
YEARLY
Engine Refer to engine operator/owner manual X
Clean cooling fins X X
Belt Check for wear and retighten X
Exciter Check for oil leaks X
Change oil X X
Tighten Bolts
1
X X
Hydraulics Check level and refill X
Hardware
Check and tighten as needed
1
X X
Shockmounts Check for cracks or tears X X
SYSTEM FLUID VOLUME RECOMMENDED OIL
Exciter 24 oz.
MBW Ground Pounder
®
Exciter Oil
1
Hydraulic Oil 4 oz. Chevron AW ISO or Rykon 32
Engine Refer to engine operator/owner manual