MBW F800GT, Rider'S Manual

Page: 122 / 189

Replacing the brake light
and rear light bulbs
with LED rear light
OA
The LED rear light can be
replaced only as a complete
unit. Consult a specialist work-
shop, preferably an authorised
BMW Motorrad dealer.
without LED rear light OA
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove screws 1 .
Pull the bulb housing to the
rear to remove.
Press bulb 1 into its socket
and turn it counter-clockwise to
remove.
Replace the defective bulb.
Bulb for tail light/brake
light
P21/5W / 12 V / 5 W / 21 W
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.
Press bulb 1 into its socket
and turn it clockwise to install.
Hold the bulb housing in posi-
tion and install screws
1 .
8
120
z Maintenance