Page 2 of 20
ENGLISH
Dear customer,
Congratulations on your new MAS-100 Atmos® (Article number: 130.4469/ 11732800001).
This quick start guide explains the basics of operating your new instrument - for safe and
easy microbial testing of technical and medical gases.
GENERAL INFORMATION
SAFETY SHEET
Carefully read the printout with all safety instructions.
USER MANUAL
To download the full user manual (English only) please visit
CONTACTS
Manufacturer
Local service center outside Switzerland
MBV AG
Merck KGaA, Darmstadt, Germany and/or its affiliates
www.sigmaaldrich.com/support/customer-support
+41 44 928 30 90
TECHNICAL SPECIFICATIONS
Power supply: Input: 100-240V, 1A max, 50-60 Hz (+/- 5%); Output: 5V, 2.1A, 10.5W
Li-ion battery: 10Ah, 7.2V
A complete list of all specifications see user manual chapter
9
«Technical Specifications».
FIRST STEPS
LOCAL USER INTERFACE
STATUS FRAME COLOR
–
Yellow: system under
pressure
–
Blue: sampling ongo-
ing
–
Red: system error
CHARGING
–
Connect the instrument via USB-C to the power supply
–
Check if the integrated LED of the power button is flashing in blue with display switched
off or if the flash icon is shown in the upper left corner with display switched on
–
Charge until battery is full (continuous blue LED or full battery icon shown)
