MBS UGW
maxi
| Mk II
User interface, operation and functions
30 of 54
Notice
Once the gateway is fully configured, we recommend carrying out a
complete system restart, deleting all historical data. You should
then check if everything was booted properly. This ensures that the
gateway would restart properly even in the event of a power failure.
Clicking
<Restart>
and confirming the dialogue text will begin the
restart.
8.2
Driver menus
General
Every installed communication driver is listed as a separate menu item
in the upper menu bar. The first submenu item on the left,
Status
, lists
the current statuses of a driver’s data points. Some selected drivers
also have their own submenu, which you can use to adjust particular
settings for that communication driver.
You can navigate the data point list with the arrow key.
Page size
The
Page size
drop-down list defines the maximum number of data
points that can be displayed at the same time.
Update interval
The
Update interval
drop-down list defines the time interval after
which the data point list is automatically updated.
Each data point has a unique address and name, as well as other
properties such as current timestamp, flags, type and value.
The meanings of the data point flags are as follows:
•
Valid value V
•
Sensor fault F
•
Incorrect data point E
•
Local operator value L
•
Set value/actual value automatic mode
‐
•
Locked, cannot be changed at the moment O
•
Upper limit warning W
