10
SECTION A
will be attached automatically.
• The temporary tone function can also be used in
pre-dialing and storing memory redial.
11. Emergency Call (Baby Call)
• When emergency call function is enabled by program
setting, Only the pre-programmed Tel. no. (”mem
0”) can be dialed out if any button is pressed except
for [
] key.
• The emergency call is invalid if ”mem 0” is not pre-
programmed.
NOTE:
When Emergency Call (Baby Call) is activated, H/S can
enter to Remote control mode.
12. Microphone Mute
• Press [
] button to mute H/S microphone, Mute
icon [
] is on, and press again to return normal.
13. Base Paging
• Press
PAGE
button on base to perform page func-
tion.
• The page tone on H/S will continue for 15 sec.
• Page icon [ ] will flash, ”bASE PAGE” message
is displayed on LCD.
14. Call Barring
• When a barring number is set by programming, any
dialing number start with this no. will be blocked.
• LCD on H/S will show ”bArring” message.
• The default barring number is NULL.
15. Battery Low Warning
• During power up, if battery low, H/S doesn’t make
any operation and LCD shows [
] for 10s while
then go to sleep (LCD turns off) until the battery is
recharged to normal voltage.
• 5 minutes after battery low in standby state, H/S
doesn’t response to any buttons and LCD turns off
until the battery is recharged to normal voltage.
FUNCTION
DESCRIPTION