Bedienungsanleitung /
Users manual
MBN GmbH, Balthasar-Schaller-Str. 3,
86316 Friedberg - Germany 37
www.proled.com
To unlock the device press DOWN- and ESC-button together and hold them pressed about three sec. The
device will be unlocked:
，
INPUT CONTROL MODES
，
The device can work with different type of input signals: DMX-512/RDM, 0/1-10V, DALI.
The input control mode can be set by placing the jumper on right position at PCB.
See page 33 till 36.
，
INPUT CONTROL MODE
– DMX
，
The device works in DMX mode, if the jumper on the PCB is in correct state.
See page 36.
SETUP
–
Access to the setup menu items
DMX
–
Address (1-507) and slave address (1-20)
MANUAL
–
Desired colour can be adjusted manually with the buttons
SINGLE
–
Standalone programs can be selected
MASTER
–
Standalone programs can be selected and the DMX signal is sent to additional devices for
synchronization.
