mbnet Engineering ergo vac, Operating Manual, Page: 5 / 40

Seite 5
User guide
ergo vac compact
1.5 Safety-conscious Operation
Make sure that the staff has read and understood the operating instructions, in par-
ticular this section Safety Notes.
Do not touch the housing of the device during defibrillation.
To ensure patient safety, none of the electrodes, including the neutral electrode, nor the
patient or any person with simultaneous patient contact, must come in contact with
conductive parts, even when these are earthed.
Immediately report any changes that impair safety (including operating behaviour) to the
responsible person.
Only use accessories and disposables recommended or supplied by mbnet
Engineering GmbH. The use of accessories or disposables from other manufacturers
may result in injury, inaccurate information and/or damage to the unit.
1.6 Safe Use with Electronics
Operating the device without the correctly rated fuse or with defective cables
constitutes a danger to the life and limb of the patient or the operator!
Therefore take note of the following:
The device must not be used if the power cable is damaged or
suspected of being damaged.
Damaged cable connections and connectors must be replaced imme-
diately.
Electrical safety devices, such as fuses, must not be modified.
1.7 Operation with other Devices
If the device is part of a medical system, only the original suction hoses from
mbnet Engineering GmbH
must be connected to the device.
Portable communication devices, HF radios and devices labelled with the symbol:
(non-ionic electromagnetic radiation) can affect the operation of this device.
1.8 Maintenance
Danger of electric shock - do not open the device! It contains no parts, which can be
repaired by the user. Servicing must only be performed by qualified technicians
authorised by mbnet Engineering GmbH .
Switch off the device before cleaning and disconnect it from the mains.
Do not use high-temperature sterilisation processes (such as autoclaving). Do not use e-beam
or gamma radiation sterilisation.
Do not use aggressive or abrasive cleaners.
Do not, under any circumstances, immerse the device or cable assemblies in cleaning
liquid.