manualshive.com logo in svg

MBM METIS 27,5, User Manual, Page: 22 / 43

Share
Download
MBM METIS 27,5 User Manual Download Page 22

METIS

 USER MANUAL

p.22

3.9 Error display

In the event of an anomaly, the system reports the problem to the user by displaying a danger icon, together with a 
4-character code that allows you to trace the type of problem.

NOTE:

 

Depending on the type of anomaly, in order to ensure safety, the system may prevent the engine from activating, 

or operate in a low-power safety mode.

3.10 Troubleshooting

PROBLEM

 CAUSE/SOLUTION

THE SYSTEM DOES NOT TURN ON 

CHECK THAT THE BATTERY IS PROPERLY INSERTED IN PLACE, AND THAT IT IS CHARGED.

SUPPORT DOES NOT ACTIVATE

CHECK THAT THE SELECTED LEVEL OF ASSISTANCE IS GREATER THAN 0, AND THAT THE LEVEL OF CARI-
BATTERY APPROX IS SUFFICIENT.

THE DISPLAY DISPLAYS AN ERROR MESSAGE

THE SYSTEM DETECTED AN ANOMALY. DEPENDING ON THE TYPE OF ANOMALY, THE ENGINE MAY BE DE-
ACTIVATED OR OPERATE AT REDUCED POWER. FOR MORE DETAILS REFER TO CHAPTER 3.10.

THE DISPLAY GLASS IS FOGGED

FOLLOWING SUDDEN CHANGES IN ENVIRONMENTAL CONDITIONS, CONDENSATION IS POSSIBLE INSIDE 
THE GLASS. CONDENSATE WILL DISAPPEAR AS A RESULT OF TEMPERATURE STABILIZATION.

Summary of Contents for METIS 27,5












































Reviews:

No comments