Op Manual | GoCrease
TM
SEMI
10
7. SETTING MACHINE USING TOUCH SCREEN
7.1 Language selection
After the power supply switch has been turned on, the display shows the basic
menu (fig.
1)
Fig. 1:
The Main screen
There is a hidden icon in the left upper corner. If you press this space a language menu
comes up (fig.2).
Fig. 2:
Language selection
Press an icon with required language. Then the display shows the basic
menu in chosen
language.
Counter reset (finished)
To reset the meter you should proceed as follows. Press the blue figure
“pcs”,
which is
the number of papers that have been processed last. This brings up a figure keyboard.
Press number
“0”
and confirm it by pressing
“ENTER”.
That takes you back to the
previous menu and the meter shows zero.
7.2 Setting Number of Segments
Pressing the numeric icon under the “
Number of creases
" displays the numeric keypad.
By pressing the relevant digit, the number of creases/perforations (segments) is set. The
program enables setting of up to 15 segments. The selection of number of segments is
ended by pressing the "
Enter
" key. The number of segments is now set.
MyBinding.com
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
