- 15 -
4.6.1.2 REPLACING THE BURNER NOZZLE (FGMD207 and FGMD207SC)
- Remove the left and front panels (see Sect.4.6.1.2).
- Unscrew the nozzles with a 17 mm. wrench (Tab.1 pos. 1).
- Replace the nozzles with the corresponding ones for the chosen gas as indicated in Table II(Sect.4.6.1.5).
Don’t forget the aluminium gas seal washer!
TAB. 11
In the case of FGMD67and FGMD107 the valve is found by
removing the right panel.
In the case of FGMD207 the gas valve is located inside the
left panel. To adjust the pressure at the
burner, after removing the panel as shown in the
figure, proceed as directed below.
FGMD207/FGMD207SC
4.6.1.3 ADJUSTING THE GAS PRESSURE AT THE BURNER
