MBM 508A Operation Manual Download

Page: 48 / 52

8. Relocation or Disposal

8-1 : Relocation

8-1-1 :

Removal of the machine from its present location

▪

Turn off the power switch.

▪

emove the power plug from the wall outlet.

▪

Lower the auxiliary table.

▪

Raise the paper ejection table and put it on the paper feed table, and hang it on the pin.

8-1-2 : Transport

▪

Transport the removed parts, attachments and Operation Manual together with the machine.

▪

not to expose the machine to strong vibration or shock.

▪

Ensure that the machine is carried by two persons wearing protective gloves, holding the four corners of

the machine base firmly.

8-1-3 : Installation

When installing the machine at its new location, observe the same procedure as when first installing it. (Refer to

“4. Preparation.”)

8-2 : Disposal

When disposing of the machine, ask a contractor specialized in industrial waste disposal to handle it in accordance

with the local regulations.

Summary of Contents for 508A





















































Search results

Summary of Contents for 508A

Reviews:

Related manuals for 508A

Brands by name

Popular brands

MBM 508A, Operation Manual

Search results

Summary of Contents for 508A

Reviews:

Related manuals for 508A

Brands by name

Popular brands