CORONA LINE
7
ENGL
ISH
3.6 Dim Standby
At this point you can adjust the brightness of the ring around the “standby“-button when standby is activated. This set-
ting is sent to all other devices within the MBL SmartLink chain. If the value has been readjusted, and “Exit” has been
pressed, further Options appear, “Cancel, “Discard”, and “Save”. “Save” keeps the change, “Cancel” rejects it, and you
return to the menu. “Cancel” brings you back to the screen where you can change the value.
3.7 Info
Here you find the firmware version of the device as well as the type of an optional input module. “Exit” brings you back
to the menu.
3.8 Factory Default
Here you can reset the whole device. All changes to the factory default settings will be lost. To start the reset procedure,
press The “Execute” button for two seconds.
