mbl 1621 A
mbl 1621 A
unique high end audio
14
Program Stop and Deleting Program
If you want to interrupt the program playback, press the stop button once (1 x). You may now change the program by adding or
deleting tracks. After that, you may re-start the program by pressing the play button.
To end the program playback, press the stop button
twice (2 x).
Attention
: Pressing the stop button twice will delete the program.
Time Display Modes
In the stop mode, the display shows the number of tracks on the CD as well as the total
playing time. During normal playback, the number of the current track and the elapsed
time for this track will appear.
You can change the time display mode by pressing the “time“ or “OSD” button on your
remote control. After pressing the button once (1 x), the display will show the total
elapsed time of your CD.
By pressing the “time“ or “OSD” button twice (2 x), you will see the total remaining time
on your CD. “REM“ can be seen on the display. The time counter will now count down the
remaining minutes and seconds.
Note that the mbl 1621 A has an additional time button installed on its front panel. The
functioning is identical to the on the remote control unit.
A
→
B Repeat Playback
By using the “A/B“ button on the remote control, you can identify passages for repeat
playback.
Note
: This button only works during playback.
After having entered the beginning and the end of a passage, the transport will begin to
repeat that same passage over and over.
The display will show “A
→
“ for the beginning and “A
→
B“ for the end of the marked
passage.
TRACK
TOTAL
TIME
TRACK
TOTAL
TIME
TRACK
TOTAL
REM
TIME
TRACK
TIME
TRACK
TIME
total playing time
elapsed time
remaining time
passage start
passage end
d
e
f
