Controller CTR-52
Operating Manual
Technical Data
CTR-52
4 channel LED driver
Current controlled operation for continuous and brightness controlled LED light
Voltage controlled operation for short, precise and high-power LED flashes, precise
flash pulses from 10µs to 100ms
Full control via Modbus TCP/IP
MS Windows 10® based control software and SDK available
Straight flash control via the camera’s ‘exposure time’,
the ‘strobe‘ signal or manual flash set-up
4 individual trigger I/O lines with flexible assignment to the LED channels
Passive cooling and overheat protection
MBJ Imaging GmbH
Jochim-Klindt-Strasse 7
+49 41 02 77 89 0 - 31
22926 Ahrensburg, Germany
Mechanical Integration
The CTR-52 controller is supplied with top hat rail mounting and
plug-contacts for the LED light, control signals and input power.
Manual CTR-52 Controller: Revision 03 - Feb 2022. INDD file Rev09.
More 2D and 3D drawings can be found online:
Safety Notes
Before working with this unit, read the warning and application instruc-
tions carefully and completely.
1. The device is designed for indoor use only.
2. Health
– The device must be disconnected from the power source
before the installation and/or maintenance can start. The device
must not be used when a failure may cause personal injury.
3. Electricity
- The housing is electrically isolated from the ground of
the power supply. Exceeding the permissible operating voltage or
exceeding the maximum allowed switching current per channel can
lead to the destruction of the device or to a significant shortening of
the lifetime of the connected LED lighting module.
4. Mechanical integration
– The controller is made for top hat rail
mounting. A clip can be used to lock the unit to the top hat rail. For
optimal heat flow a left/right distance of 10mm to next unit is rec-
ommended.
Status LED’s CTR-52
LED
Status
Meaning
LED 1
OFF
ON
Trigger low state
Trigger high state
LED 2
OFF
ON
Trigger low state
Trigger high state
LED 3
OFF
ON
Trigger low state
Trigger high state
LED 4
OFF
ON
Trigger low state
Trigger high state
Trigger Signals
