MBG SWEDEN 22, User Manual

Page: 3 / 4

MBG 22, 48, 100 & 150 Key Safe Users manual 2019-06 MBG SWEDEN
P a g e 3 | 4
2. Code programming
2.1 How to change the guest code
•
Under the door-opening state, input new 4-6 guest codes and “ LOCK ”, the
display will show “ AGAIN ”.
•
Re-enter the new code and press “ LOCK ”, the display will show “ DONE ”
that indicates new guest code changed successfully.
2.2 How to change the master code
•
Under the door-opening state, input “ 0-0-LOCK ”, the display will show
“ OLD ”, input old master code then press “ LOCK ” to show “ NEW ”.
• Enter new 6-digit master code (within 10 seconds after “ NEW ” disappears),
then press “ LOCK ”, the display will show “ AGAIN ”.
•
Re-enter the new master code and press “ LOCK ”, the display will show
“ DONE ” indicates new personal code changed successfully.
3. Open the safe with emergency key
•
Remove the screw on the side of the panel, then take off the panel. The
position of the screw is shown in Figure 1 .
• Insert the emergency key and rotate clockwise to open the door. Key hole
position shows in Figure 2 .
Figure 1 Figure 2