CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
CONNECTION
1. Connect the power cord to AC outlet
2. Switch the function switch from Power off to PHONO or USB/SD function. Now your system
is ready to play the music from vinyl or USB/SD card.
PHONO OPERATION
1.
Press the 4 stages function switch to
PHONO
position. Then put
a record on the Platter lightly. In certain circumstances, 45 RPM
adapter is needed;
2.
Select the speed of record: 33 1/3, 45, 78rpm according to vinyl
to play.
3.
Remove the stylus guard and push the lift lever upward to raise
the tone arm from the arm park, and then move the cartridge holder over the record gently,
now the platter will run automatically (default set of Auto/Manual stop switch at ON
position). Then put down the lever, the tone arm would drop and touch record surface
gently. Now users can enjoy their favorite sons.
4.
Select the auto/manual stop control: The turntable will stop automatically while the song on
